Description
- Waveshare 0.96inch OLED Display Module (Blue)
- Compact and efficient with a 128x64 resolution
- Compatible with Raspberry Pi, Arduino, and STM32
- Features an onboard voltage translator
- Utilizes SPI/I2C communication for fast data transmission
The Waveshare 0.96inch OLED Display Module, 128x64 Resolution, SPI/I2C E (Blue) is a compact and efficient display module that features a 128x64 resolution. This module is designed with an ultra-narrow bezel, which contributes to its compact size. It is equipped with an embedded SSD1315 driver chip and utilizes SPI/I2C communication for efficient data transmission.
The module is compatible with a variety of platforms, including Raspberry Pi, Arduino, and STM32, and comes with examples for each of these platforms. This ensures better compatibility and a faster data rate. Furthermore, it adopts 4-wire SPI and I2C interfaces, which further enhance its compatibility and data transmission speed.
- 1x 0.96inch OLED Module
- 1x Jumper Cable Female 7-Pin
Website
- Operating voltage: 3.3 V / 5 V
- DISPLAY PANEL: OLED
- Resolution: 128 x 64 pixels
- Communication Interface: 4-wire SPI / I2C
- Driver: SSD1315
- Display color: (C): Upper Yellow & Lower Blue | (D): White | (E): Blue
- Control Interface: RES Reset, low active
- DC Data/Command selection (high for data, low for a command)
- CS Chip selection, low active
- CLK Clock Input
- DIN Data Input
- GND Ground
- VCC Power (3.3V / 5V input)
- Weight: 9 g