Description
- DFRobot 2.13" E-Ink Display Module for Raspberry Pi 4B/3B+/Zero W
- Features a 2.13-inch high-resolution E-Ink display
- Supports custom fonts and touch switches
- Ensures low power consumption and plug-and-play capability
- Retains last image displayed even when powered off
- Avoids pin conflicts, allowing use with other peripherals
The DFRobot 2.13" E-Ink Display Module for Raspberry Pi 4B/3B+/Zero W features a 2.13-inch screen with a resolution of 250×122, utilizing an SPI interface for communication with the Raspberry Pi. The module is designed to avoid conflicts with the Raspberry Pi’s pins, allowing simultaneous use of the e-ink display and other peripherals. It supports custom fonts and includes two patch touch switches for expanded functionality. The display is characterized by its small size, compact layout, plug-and-play capability, and low power consumption. It provides clear visibility even in direct sunlight and retains the last displayed image when powered off. However, due to the extended time required for a full refresh, it is not recommended for applications requiring frequent updates.
Note: Avoid using this product in applications that need frequent refreshing to display data.
- 1x Raspberry Pi e-ink Display Module
- 2x Double Nuts Copper
- 4x Screw
- 66.5 x 31 mm (2.62 x 1.22 inches)
- Operating Voltage: 3.3V
- Resolution: 250 x 122 pixels
- Interface Type: SPI
- Colors Available: Black and White
- Refresh Options: Full or Partial
- Full Refresh Time: 3 seconds
- Partial Refresh Time: 680 milliseconds
- Refresh Power Consumption: 26.4mW (typical)
- Standby Power Consumption: 0.017mW
- Visual Angle: Greater than 170 degrees
- Connector Type: 2.54mm 2x20 pin
- Storage Temperature Range: -20°C to +60°C